Bedra

.012" 11-lb Bedra Berco Cut Type 390 soft brass wire

$0.00

.012" 11-lb P-5 spools Bedra Berco Cut Type 390 soft brass wire, well suited for taper cuts up to 40 degrees.(note: non-stock, special order item; contact us for quantities and delivery time.)
pkg is 4-spools
 

$0.00

.012" 17.5-lb Bedra Berco Cut Type 400 soft brass wire

$0.00

.012" 17.5-lb Bedra 8 spools, Bedra Berco Cut Type 390 soft brass wire, capable of taper cutting up to 45 degrees.  (Special order on this item; contact us for details.)
package is 2 spools 

$0.00

.012" 22-lb P10 Bedra Topas Plus H Gamma Phase EDM Wire

$0.00

The 22-lb spool is round, and the plastic spool is NOT hexagon shape.  .012" 22-lb P10 spools - Bedra Topas Plus "H" gamma phase edm wires; well suited for Japanese machines where increased speeds are desired versus brass edm wires.  We maintain a large inventory of this item in our warehouse.  Price is package of two spools.  This item is in our stock, orders on this item can ship immediately!

 

$0.00

.012" 35-lb Bedra Berco Cut Type 900 hard brass wire

$0.00

.012" 35-lb Bedra Berco Cut Type 900 hard brass wire.

  • Suitable for straight cuts, and taper cuts up to 7 to 10 degrees.
  • Excellent wire threading capabilities.
  • Bedra 16 spool (fits all machines that accept a 35-lb spool)
  • Non-standard item.  Contact us for special order basis.

   

$0.00

.010" 8.8-lb spools Topas Plus X Gamma Phase Wire

$0.00

.010" 8.8-lb spools Topas Plus X gamma-phase edm wires; excellent cutting performance on Charmille series machines where increased cutting speed is important.  This wire matches up well versus XCC wire when used properly (i.e. machine power settings); thus you should gain performance from this wire.  This item is a "standard stock item".  (box consists of 4 spools)  If you buy in quantity, contact us with your requirements for enhanced pricing.
price shown is for one spool.
In stock, can ship immediately!

$0.00

.010" 17.5-lb spools Topas Plus X Gamma-Phase Wire

$0.00

.010" 17.5-lb spools Topas Plus X gamma-phase coated edm wire; excellent cutting properties on Charmille series machines, especially where enhanced speed is important.  Contact us for details on the proper power settings to use on this wire.  This material is a "standard stock item".  Price is pkg of 1-spool (box consists of 2 spools); contact us for quantity purchase pricing.
In stock, can ship immediately!

$0.00

.010" 35-lb spools Topas Plus X Gamma-Phase EDM Wire

$0.00

.010" 35-lb spools  Topas Plus X gamma-phase coated edm wires, specifically recommended for use on Charmille series wire edm machines; especially useful where increased cutting speeds are desired.  Need help on power settings for this wire; contact us for details.   Price is pkg of 1-spool (box consists of 1-spool)
In stock, can ship immediately!

$0.00

.012" 17.5-lb spools Topas Plus X Gamma-Phase EDM Wire

$0.00

.012" 17.5-lb spools  Topas Plus X gamma-phase coated edm wires; specifically engineered and designed for use on Charmille series machines.  When increased cutting speeds are desired, this wire is well suited for that purpose when the proper power settings are used.  Contact us for quantity pricing purchases.
price is pkg of 1-spool  (box consists of 2 spools)
In stock, can ship immediately!

$0.00

.012" 35-lb spools Topas Plus X Gamma-Phase EDM Wire

$0.00

.012" 35-lb spools  Topas Plus X gamma-phase coated edm wires; specifically engineered and designed for use on Charmille wire edm series machines; very well suited for applications that require increased cutting speeds.  This product is a non-stock, special order item.  Contact us with your requirements (i.e. amount required, monthly useage, etc) for further details.
price is pkg of 1-spool  (box consists of 1 spool)

$0.00

.013" 17.5-lb spool Bedra Topas Plus X Gamma Phase EDM Wire

$0.00

.013" 17.5-lb spool  Bedra Topas Plus X Gamma Phase EDM Wire; specifically engineered for use on Charmille series wire edm machines, where enhanced speed is beneficial on your application.  Proper power setting selection allows this wire to perform and meet expectations.  Contact us if you need suggestions on your power settings for this product.  Presently this product is a "non-stock" item, however that designation should change soon.  Consult us for more exacting details.
price is for 1 spool.  (Box consists of 2 spools)

$0.00

.013" 35-lb spool Bedra Topas Plus X Gamma Phase EDM Wire

$0.00

.013" 35-lb spool  Bedra Topas Plus X gamma-phase edm wire; specifically engineered for use on Charmille series machines where increased speed, improved finish, and tight tolerances are desired.  Contact us for suggestions on the proper machine power settings to use for this product.  This product is presently a "non-stock item", however that designation may change soon.
price is pkg of 1 spool  (box consists of 1 spool)

$0.00

.010" 55-lb Bedra Topas Plus X Gamma Phase EDM Wire

$0.00

.010" 55-lb spool (P15) Bedra Topas Plus X gamma-phase edm wire; specifically designed for use on Charmille series machines where speed, accuracy, and finish are required on your application.  This product is presently a "non-stock item".  Please contact us for details about your requirements and useage.
price is pkg of 1-spool  (box consists of 1 spool)

$0.00

.012" 55-lb Bedra Topas Plus X Gamma Phase EDM Wire

$0.00

.012" 55-lb P-15 spool  Bedra Topas Plus X gamma-phase edm wire, specifically designed for use on Charmille series machines.  For applications that require enhanced cutting speed, improved finish and accuracy, this wire may be the right selection for you.  Contact us for more details, and suggestions on power settings for this wire on your Charmille edm machine.  Note, this wire is a "non-stock item" presently; contact us about your requirements and useage on your applications.
price is pkg of 1-spool  (box consists of 1 spool)

$0.00

.010" 100-lb Bedra Topas Plus X Gamma Phase EDM Wire

$0.00

.010" 100-lb spool  Bedra Topas Plus X gamma-phase edm wire, specifically designed for use on Charmille series machines, where improved cutting speed, excellent finish, and tight accuracies are important.  This product is presently a "non-stock item".  Please consult us with your possible requirements and useages on a product of this nature.  For further details regarding suggested "power settings" on this wire, contact us.
price is pkg of 1-spool  (box consists of 1 spool)

$0.00

.010" 44-lb P15 Bedra Mega Cut A zinc coated edm wire

$0.00

.010" 44-lb P-15 spool Bedra Mega Cut A zinc coated edm wire.  Especially well suited for improved cutting performance on carbide, stainless, tool steels, and selected exhotic materials.  Price shown is for 1 spool; if you are buying in quantity, contact us with your requirements.  (this is presently a non-stock item; delivery time depends upon quantity required.)
 

$0.00